Marble is used to create some of the most stunningly beautiful countertops around, but it does require a little extra TLC if you want it to remain free of dirt, scuffs, and stains. Unfortunately, not many people are aware of the fact that some cleaning agents and methods can have a negative impact on their marble countertops. To make sure yours stay looking as wonderful as the day they were installed, keep the following points in mind.
Use the Right Cleaning Agents
Marble is closely related to limestone, so it is soft, porous, and quite sensitive to the acids found in wine, citrus fruits, and many everyday cleaning products. Spilling coffee on your marble countertop can cause staining, but using an acidic cleaner can do damage all by itself.
This means that you need to look for pH-neutral cleaning products, although it is easier to simply pick up a specialty marble cleaner. Make sure that it is resistant to grease and water, rinse-free, and able to provide a streak-free finish. Additionally, make sure you read the safety instructions carefully before you use it.
Keep it Regular
When dealing with marble, it is crucial that you clean regularly in order to prevent discoloration and staining. You don’t need to spend hours each day scrubbing away, but you should never let dirt build up.
The best thing to do is commit to a regular cleaning schedule. Take a mild, bleach-free detergent or speciality marble cleaner, then add it to water. Lightly wipe down your countertops, then rinse with clean water and dry them off quickly with a micro-fibre cloth.
Seal It Up
Your marble countertops will probably come pre-sealed, but that seal won’t last forever. This means that you’ll need to commit to resealing every six months or so to ensure that your surfaces remain free from damage. Since countertops are used to make food, you can’t use just any sealant; look for one that has been approved for food preparation areas.
If you need to clean a part of your marble countertop right away in order to avoid staining, just create a quick and easy cleaning product by mixing one-part baking soda to 20-parts water. Wet a cloth with the solution, then apply to the appropriate area. Instead of using an abrasive brush or cloth, simply use increased pressure across stained areas. Leave to dry for 1-2 hours, then rinse with water and dry off with a clean cotton cloth.